Sx-2000 Light To 3300 Icp - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2
Note: The upgrade procedure does not change the DHCP
Server settings or the Voice Mail messages. DHCP Lease times
are renewed after an upgrade.

SX-2000 LIGHT to 3300 ICP

•
Only one 3300 ICP can be configured at a time; and only
one SX-2000 PBX can be migrated to a 3300 ICP at a time.
•
Migration and Configuration cannot be performed in a
single task or session using the 3300 Configuration Tool.
•
After migration, configuration must be completed using
System Administration Tool.
•
Data restoration automatically triggers data migration.
•
If existing capacity is greater than that of the 3300 ICP, the
conversion will fail. See the capacity table for the 3300 ICP.
•
Windows 2000 users should clear the browser cache.
To transfer database from SX-2000 LIGHT to 3300 ICP:
1. Prepare the SX-2000 LIGHT for migration:
- reduce Peripheral and DSU nodes to a maximum of 4
- deprogram unsupported devices and cards (AC13, AC15,
SCDC, DID3, Advanced Tone Detector, ISDN Gateway, FIM
Carrier Card, COV Line Card, 3DN, 4DN, SUPERSET 3,
SUPERSET 4, SUPERSET 700, SUPERSET 7DN,
SUPERCONSOLE 2000, and datasets).
2. Program SX-2000 connectivity using the Configuration Tool.
Create a Network Element that is the same as the SX-2000
PBX.
3. Backup SX-2000 database (datasave) to the 3300
Configuration Tool or copy a datasave from OPS Manager to
the Configuration Tool. The Configuration Tool will convert the
SX-2000 database to a 3300 database.
- 93 -