Mitel 3300 ICP Technician's Handbook page 123

3300 ICP Technician's Handbook – Release 3.2
4. Remove the blanking plate from the selected slot.
5. Insert the interface assembly extension bracket into the slot
with the closed side of the bracket to the left (when viewed from
the rear of the cabinet).
6. Using the screws that secured the blanking plate, secure the
interface assembly extension bracket into the slot.
7. Insert the interface assembly into the slot.
8. Using the screws provided, secure the interface assembly to
the extension bracket.
Install a BRI Card
To install the BRI card:
1. Attach the anti-static strap to your wrist.
2. Unpack the BRI card and inspect it to ensure that it is not
damaged.
- 115 -