Install 3300 Icp As A Stand-Alone Voice Mail - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2
4. To check the connections between the 3300 Controller and the
PC:
PING the 3300 Controller IP address
FTP to the 3300 Controller IP address
Go to the 3300 Controller URL address (e.g. http://192.168.1.2).
5. Launch browser to login to the System Administration Tool
(http://192.168.1.2 -- username is system, password is
password).
6. License and Option Selection form: Program number of digital
links, IP device licenses, and country variant. Reboot the
system.
7. Controller Module Configuration form. Select the Programmed
Module Type.
8. Network Services Unit Configuration form. Set the type of NSU
and the protocol to be used.
9. Program digital trunks Q.SIG or MSDN/DPNSS.
10. Program Symbol Wireless phones as per instructions in System
Administration Tool.
Note: You will require the ESS ID's of the Air Access Points for
the configuration. Information on the steps requiring the Symbol
NetVision MiNET Phone Administrator Tool can be found in the
tools help system. You will be required to upgrade the Symbol
phones firmware to the MiNET protocol.
11. Perform a Backup.
12. Reboot the system.
13. Set the 3300 Controller (RTC) IP address through a
communication program.
14. Install a Universal NSU.

Install 3300 ICP as a Stand-alone Voice Mail

The 3300 ICP can be used as a voice mail system adjunct to a
legacy or third party PBX.
To install as a stand-alone voice mail system:
1. Install the 3300 ICP Controller.
- 75 -