Superset Hub; Overview Of The Superset Hub Installation - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2

SUPERSET HUB

Overview of the SUPERSET Hub Installation

To install the SUPERSET HUB:
1. Install the Peripheral Slot FIM Carrier in the Peripheral Cabinet.
2. Install the SUPERSET HUB unit. The supplied mounting
brackets allow you to install the unit in an equipment rack or to
mount the unit on a wall.
Once you have completed these steps, you can proceed to
Installing a DSU Node or return to System Installation Overview.
Notes:
•
When installing the SUPERSET HUB in an enclosed rack,
you MUST provide adequate ventilation (for example, fans)
to ensure that the maximum ambient temperature inside the
rack does not exceed 40ºC.
•
When mounting the SUPERSET HUB in a rack, you should
ensure that a hazardous condition is not achieved due to
any uneven mechanical loading.
•
When using the SUPERSET HUB in a rack, you should
consider the connection of the equipment to the supply
circuit and the effect that overloading of circuits might have
on over-current protection and supply wiring. When
addressing this concern, consider the SUPERSET HUB's
ratings label.
•
You can upgrade or replace the Fiber Interface Module in a
SUPERSET HUB.
WARNING: this product uses a Class 1 LED. Fiber optic
sources emit infrared radiation. This radiation is invisible to
the human eye and can damage the retina. NEVER look directly
into the end of a fiber optic cable that you suspect is energized
by a fiber optic source. When working with raw fiber optic
cable, be aware of fiber ends and slivers which can puncture
the skin and cause irritation.
- 65 -