3300 ICP Technician's Handbook – Release 3.2
The new Release 3.2 chassis:
1. Remove the cover.
2. Install the DSP Modules (slots MMC3 and MMC4).
3. Install the Sys ID Module.
4. Install the Hard Drive.
5. Replace the cover.
SX-2000 LIGHT to 3300 ICP
To upgrade SX-2000 LIGHT hardware for 3300 control:
•
384 port Peripheral - main control replacement
•
DSU - main control replacement
•
Peripheral cards - DNIC Line, ONS CLASS, ONS Line,
LS/GS Trk, E&M Tie Trk, OPS Line, DID/Loop Tie
•
DSU cards - T1 (DS1) Formatter, CEPT Interface, ISDN
PRI, E1/T1 Dig Trk Formatter, E1 R2, 6CCT BRI, 15CCT
BRI
•
If existing capacity is greater than that of the 3300 ICP, the
conversion will fail. See the capacity table for the 3300 ICP.
- 87 -