Install The 3300 Controller - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2

Install the 3300 Controller

To install the 3300 Controller:
1. Install the System ID Module.
2. Set up a serial connection between the 3300 Configuration Tool
PC and the Maintenance (RS-232) port on the 3300 Controller.
Baud rate - 9600, Data bits - 8, Parity - None Stop bits - 1, Flow
control - None.
3. Set up an Ethernet connection between the 3300 Controller and
the 3300 Configuration Tool PC (a standard LAN cable from an
RJ-45 connector on the 3300 Controller L2 switch to the PC
NIC).
Note: You can connect IP telephones to the 3300 Controller
through L2 switch external ports, for testing only, after
installation of the database and configuration. IP Phones
require a configured DHCP server.
- 15 -