Peripheral Unit - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2

Peripheral Unit

Power Down the Peripheral Unit
To power down a Peripheral Unit:
1. Remove the front panels.
2. Switch off the power converter.
3. Set the power switch on the rear of the unit to '0' (OFF).
4. Unplug the external power cord at the rear of the unit.
Power Up the Peripheral Unit
To power up a Peripheral Unit:
1. Ensure the voltage selector switch is set to the required setting
for your country.
2. Connect the power cord at the rear of the unit to the external
AC power source.
3. Set the power switch on the rear of the unit to 'I' (ON).
4. Set the switch on the power converter faceplate to 'I' (ON).
Remove a Front Panel
To remove a front panel from the DSU or Peripheral Unit:
- 105 -