Install The Peripheral Slot Fim Carrier; Install The Superset Hub - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2

Install the Peripheral Slot FIM Carrier

To install the Peripheral Slot FIM Carrier:
1. Attach an anti-static wrist strap.
2. Unpack the Peripheral Slot FIM Carrier and inspect it to ensure
that it is not damaged.
3. Remove the Peripheral Cabinet front and rear panels.
4. Slide the Peripheral Slot FIM Carrier partway into the first
available slot from the right.
5. Remove the black plastic dust caps from the fiber optic cable
connectors and from the connector ferrules on the faceplate of
the FIM.
6. Connect the fiber optic cables to the connectors on the FIM via
the fiber optic access port on the rear of the cabinet. Note: The
fiber optic cable connectors have a small key that you must
align with a slot on the FIM connectors. Lock each connector
into position by pushing its metal collar forward and clipping it
onto the FIM connector.
7. Push the Peripheral Slot FIM Carrier fully into the slot and
secure it with the card latch.
8. Remove the anti-static wrist strap.
9. Route the fiber optic cables from the Peripheral Cabinet to the
SUPERSET HUB.
10. Replace the Peripheral Cabinet front and rear panels.
Note: For more information, see Fiber Interface Module (FIM).

Install the SUPERSET HUB

To install the SUPERSET HUB unit:
1. Attach the rubber feet to the base of the unit.
2. If required, secure the mounting brackets to the SUPERSET
HUB case by using the holes appropriate to the selected
mounting position and install the unit in an equipment rack or
mount the unit on a wall. Note: The side that contains the row of
RJ-45 connectors faces the front when the unit is rack-mounted
- 66 -