3200 Icp To 3300 Icp - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2

3200 ICP to 3300 ICP

•
Only one 3200 ICP can be migrated to a 3300 ICP at a
time.
•
Migration and Configuration cannot be performed in a
single task or session using the 3300 Configuration Tool.
•
After migration, configuration must be completed using
System Administration Tool.
•
Data restoration automatically triggers data migration.
•
If existing capacity is greater than that of the 3300 ICP, the
conversion may fail. See the capacity table for the 3300
ICP.
•
Windows 2000 users should clear the browser cache.
•
Export the Name, Number and PIN of each user with a
Symbol phone to a .csv file using the Telephone Directory
Export Application in OPS Manager (only do this if you are
migrating a 3200 ICP that has Symbol Phones programmed
that use Direct Sequence Spread Spectrum).
•
Install the Symbol NetVision MiNET Phone Administrator
Tool on a Windows NT or Windows 2000 PC.
Note: Although the 3200 ICP FD_DSU programming is restored
to the 3300 ICP, you must deprogram the DSU and reprogram
using the System Administration Tool after you install new
hardware.
To transfer database from a 3200 ICP to a 3300 ICP:
1. Prepare the 3200 ICP for migration:
- deprogram unsupported devices and cards (AC15, SCDC,
Advanced Tone Detector, ISDN Gateway, FIM Carrier Card,
COV Line Card, 3DN, 4DN, SUPERSET 3, SUPERSET 4,
SUPERSET 7DN, and datasets).
2. Program 3200 ICP connectivity using the Configuration Tool.
Create a Network Element that is the same as the 3200 ICP.
3. Back up 3200 ICP database (datasave) to the 3300
Configuration Tool or copy a datasave from OPS Manager to
- 96 -