Software Install Procedure - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2
CAUTION: After restoring a database you must reboot the
system. When the system reboots, service will be LOST.

Software Install Procedure

WARNING: You must back up the system and voice mail data.
WARNING: The software installation procedure will format the
3300 Controller hard drive and install new software.
Before you begin
Installer's PC requirements:
•
Windows NT 4.0 or Windows 2000 operating system
•
FTP server running (with IIS installed)
•
Ethernet card and a connection to the Mitel Networks 3300
ICP
•
A communications program such as VT100 or HyperTerm
•
A serial connection to the 3300 ICP maintenance port
•
Windows 2000 users should clear the browser cache.
You also need:
•
the IP address of the 3300 ICP
•
3300 ICP software CD-ROM.
Time: The entire rebuild procedure, including backup and
restore, will take approximately 3 hours.
Rebuild Procedure
1. Connect your PC to one of the 3300 ICP ethernet ports.
2. From your PC, ping the 3300 ICP to verify that you have a
connection established.
- 164 -