3300 ICP Technician's Handbook – Release 3.2
Maintain
Healthy System Checklist
Ensure that the system is running properly by checking that there
are:
•
No alarms present
•
DBMS Status initialized flag is on
•
DBMS check is scheduled
•
Programmed Reboot is scheduled
•
No error logs
•
Database is backed up
Checking the System
To check the system:
1. Click Maintenance and Diagnostics.
2. Click Maintenance Commands.
3. Click All.
4. Enter the following commands:
SH ST AL Checks for system alarms. There should be no
alarms. DBMS STAT - Checks the status of the initialized flag.
If the flag is off enter DBMS Save command.
PROGRAMMED REBOOT DISPLAY - Displays the scheduled
system reset.
ME S - Checks the status of all communication links. All
communication links should be open.
PCM TO - Checks for Circuit Switch Faults. There should be no
faults.
5. Click Logs.
6. Click Maintenance Logs.
7. Click Error - Checks for error logs or click ALL to see all
maintenance logs.
- 168 -