Install Imat - Mitel 3300 ICP Technician's Handbook

3300 ICP Technician's Handbook – Release 3.2
3. Enter the following parameter: Network Access: Unrestricted or
Applet host (do not select None)
4. Use the default settings for the parameters in the Advanced and
Proxies property sheets.
5. Click Apply.
The 3300 Configuration Tool PC, operating on Windows NT 4.0 or
Windows 2000 Professional, is connected to the 3300 Controller
through a serial connection and a network connection. The PC must
be equipped with an Ethernet card, an Ethernet cable, a
communications program, a serial port (use HyperTerminal default
settings), and a serial cable.

Install IMAT

Mitel Networks ISDN Maintenance and Administration Tool (IMAT)
is a Windows-based application you use to program and maintain
the Universal NSU and the R2 NSU on the 3300 ICP.
To install the IMAT software:
1. Shut down all applications on the IMAT PC.
2. Insert the CD-ROM into the CD drive.
3. On the Start menu, click Run.
4. Type your CD drive letter followed by :\imat\disk1\setup.exe
5. Click OK.
6. Follow the prompts.
- 78 -