Table of Contents
Advertisement
Main changes in this edition
Page
621 to 681
Changed the entire part of "APPENDIX B Instructions"
The vertical lines marked in the left side of the page show the changes.
Reference: Main changes (Rev.2 → Rev.3)
Page
Added the following part number.
(MB90V390HA, MB90V390HB, MB90394HA, MB90F394HA)
Register name and pin name are changed.
(Program bank register (PCB) → Program counter bank register (PCB))
(Additional bank register (ADB) → Additional data bank register (ADB))
(ESCR3 → ESCR2/ESCR3)
(SIN3 → SIN2/SIN3)
(SOT3 → SOT2/SOT3)
(SMR3 → SMR2,SMR3)
(ECCR3 → ECCR2/ECCR3)
(BGR03/13 → BGR02/BGR03,BGR12/BGR13)
(SSR3 → SSR2/SSR3)
-
(RDR3 → RDR2/RDR3)
(SCR3 → SCR2/SCR3)
(TDR3 → TDR2/TDR3)
(SCK3 → SCK2/SCK3)
(UODR0, 1, 2 → UODR0, UODR1)
(UIDR0, 1, 2 → UIDR0, UIDR1)
Function name is changed.
(UART0, 1, 2 → UART0, UART1)
(UART3 → UART2, UART3)
(UART3 synchronous clock mode → UART2, UART3 synchronous clock mode)
(3M/4M-BIT FLASH MEMORY → 3M-BIT FLASH MEMORY)
Table 1.2-1 Features of the MB90390 Series (1/3) is changed.
3
(UART of MB90V390H : 3 channels → 2 channels)
Table 1.2-1 Features of the MB90390 Series (2/3) is changed.
4
(Clock Modulator is added.)
Table 1.2-1 Features of the MB90390 Series (3/3) is changed.
(15 years → 20 years*)
5
(* is added.)
Table 1.8-1 Pin Description (1/6)
13
Pin name of pin number 98 is changed.
(P00 to P05 → P05)
● Preventing latch-up is changed.
22
(Therefore, the maximum voltage ratings must not be exceeded. By the same token, make sure that the
analog supply voltage (AVCC and AVRH) should not exceed the digital supply voltage. is added.)
● Power supply input pins (V
23
Changes (For details, refer to main body.)
Changes (For details, refer to main body.)
/V
) is changed.
CC
SS
xv
Advertisement
Table of Contents
