Guitar
Small Slap Bass
This Patch is a more DSP-efficient slap bass model. It offers higher polyphony than
the Slap Bass Patch, but fewer features.
String
Decay
0-100. This controls the overall decay time of the string.
Damping
0-100. This controls the decay time for the string's high frequencies. Lower settings
mean a shorter high frequency decay time. Damping interacts with the Decay
parameter, below, which controls the overall decay time.
Pickup Position
0-100. This adjusts the position of the pickup along the string.
Force
Initial
0.0-100.0. This adjusts the force of the slap.
Vel. Mod. (Velocity Modulation)
0-100. This allows you to modulate the force via velocity. A velocity of 127 will add
the specified amount to the setting on the Force knob.
Maximum
0-100. This sets the maximum amount of force, even with modulation.
Velocity
Velocity
0-100. This models the velocity of the "slap" across the string, which affects the
amount of high frequencies in the sound.
Contact Time
0-100. This models the amount of time that the pick is in contact with the string.
Low settings emphasize lower frequencies, and high settings emphasize high
frequencies.
Vel. Mod. (Velocity Modulation)
+/-100. This allows you to modulate the contact time via velocity. A velocity of 127
will add or subtract the specified amount to the setting on the Contact Time knob.
OASYS PCI
Small Slap Bass
83