Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 81

Guitar
Noise
These controls allow you to "pluck" the string using filtered noise.
The Pluck controls, above, offer a different way to "pluck" the string. You can also
use Pluck and Noise together, to create specific tones.
Level
0.0-100.0. This adjusts the level of the noise.
Vel Mod (Velocity Modulation)
0.0-100.0. This allows you to modulate the noise level via velocity. A velocity of 127
will add the specified amount to the setting on the Level knob.
Cutoff
+/-100. This adjusts the tone of the noise.
Brightness
Cutoff
+/-100. This adjusts the overall brightness of the string.
Vel Mod (Velocity Modulation)
0.0-100.0. This allows you to modulate the cutoff via velocity. A velocity of 127 will
add the specified amount to the setting on the Cutoff knob.
Vibrato
Frequency
0.0-20.0 Hz. This controls the initial speed of the vibrato.
Frequency Mod
List of Modulation Sources. This sets the modulation source for controlling the
vibrato frequency. For a complete list, please see "Modulation Sources" on page 2.
Amount
0.0-10.0Hz. This sets the amount, in Hz, by which the mod source affects the
vibrato frequency. When the mod source is at its maximum value, it will add this
amount to the setting on the Frequency knob.
Depth
0-100. This controls the initial depth of the vibrato–the amount of pitch modulation.
Depth Mod
List of Modulation Sources. This sets the modulation source for controlling the
vibrato depth. For a complete list, please see "Modulation Sources" on page 2.
OASYS PCI
Plucked String
73