St Env Flanger - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

St Env Flanger

St Env Flanger
This is a stereo-in, stereo-out flanger based on an envelope instead of an LFO. You
can trigger the envelope via MIDI, and also simply control the flanger frequency
directly from a MIDI controller.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Stereo Envelope Flanger
Left Delay Min
0.0-50.0ms. This sets the left delay time when the envelope or mod source is at
minimum.
Left Delay Max
0.0-50.0ms. This sets the left delay time when the envelope or mod source is at
maximum.
Right Delay Min
0.0-50.0ms. This sets the right delay time when the envelope or mod source is at
minimum.
Right Delay Max
0.0-50.0ms. This sets the right delay time when the envelope or mod source is at
maximum.
Feedback
+/-100. This controls the amount of feedback in the flanger. Higher feedback
settings result in a more extreme sound.
High Damp
0-100. This controls the amount of high frequency damping in the flanger feedback.
Spread
+/-100. This controls the width of the effect's stereo image, without affecting the dry
signal. A value of +100 gives the widest stereo image, and a value of 0 collapses the
output to mono. Negative values will reverse the left and right channels of the
effect output.
456
Flangers
OASYS PCI