Phasers
St RandomPhaser
This is a stereo-in, stereo-out phaser, with step-shaped and sample-and-hold
waveforms.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Stereo Phaser
Center
0-100. This sets the center frequency of the phaser.
Depth
0-100. This controls the amount of LFO modulation of the center frequency.
Depth Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO depth. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the LFO depth.
Resonance
+/-100. This sets the amount of resonance in the phaser effect. Higher resonance
settings create a more extreme sound.
Hi Damping
0-100. This controls the amount of high frequency damping in the phaser
resonance.
Spread
+/-100. This controls the width of the effect's stereo image, without affecting the dry
signal. A value of +100 gives the widest stereo image, and a value of 0 collapses the
output to mono. Negative values will reverse the left and right channels of the
effect output.
LFO
Waveform
Step Triangle, Step Sine, Random. This selects the main waveform for the LFO.
OASYS PCI
St RandomPhaser
569