Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 50

Mini Synth
Envelope amount affect on cutoff frequency
Attack
0-100. This sets the attack time of the filter envelope, which controls how long it
takes from the moment that the key is pressed until the envelope reaches its peak.
Decay
0-100. This sets the decay time of the filter envelope, which controls how long it
takes the envelope to fall to the sustain level after the attack is complete.
If the Decay button is turned on (see the Controllers section, on page 38), then this
will also set the envelope release time.
Sustain
0-100. This sets the sustain level for the filter envelope. After the decay time is
complete, the envelope will stay at this level as long as the note is held.
ADS Envelope
Loudness Contour
These parameters control an ADS envelope dedicated to the output volume. For a
graphic explaining ADS envelopes, see the figure "ADS Envelope," above.
42
+100
0
Attack time Decay time
Sustain
Level
Release time (with
Sustain while Decay button on)
holding note
Analog Synths
OASYS PCI