EQ
St Graphic EQ10
This is a stereo-in, stereo-out ten-band graphic EQ. As with all EQs in the OASYS
PCI, the curves are smooth and symmetrical in frequency, modeling analog EQs.
For the more technically inclined, the EQ calculations are all double-precision,
using first-order error-feedback.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Note that extreme positive or negative gain settings can dramatically increase the
volume within the EQ effect, so it may be necessary to decrease the input volume to
avoid clipping.
Octave Band Mono Graphic EQ
31.25
+/-18.1dB. This sets the amount of boost or cut for the band centered on 31.25Hz.
62.5
+/-18.1dB. This sets the amount of boost or cut for the band centered on 62.5Hz.
125
+/-18.1dB. This sets the amount of boost or cut for the band centered on 125Hz.
250
+/-18.1dB. This sets the amount of boost or cut for the band centered on 250Hz.
500
+/-18.1dB. This sets the amount of boost or cut for the band centered on 500Hz.
1 k
+/-18.1dB. This sets the amount of boost or cut for the band centered on 1kHz.
2 k
+/-18.1dB. This sets the amount of boost or cut for the band centered on 2kHz.
4 k
+/-18.1dB. This sets the amount of boost or cut for the band centered on 4kHz.
OASYS PCI
St Graphic EQ10
401