Early Reflections Long - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Early Reflections
Early Reflections Long
This effect models the initial reflections off the walls of a reverberant space, before
the discrete echoes turn into an ambient wash. The different ER types also allow
you to create gated and reverse reverb effects.
This effect has a 600ms maximum ER time, but is otherwise similar to "Early
Reflections," as described on page 377.
Input
Source
Left, L + R. This is a mono-in, stereo-out effect. Stereo signals are preserved in the
dry mix at the output, but the effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Pre EQ
Low Gain
+/-18.1dB. This sets the amount of gain for the pre-effect low shelving EQ.
High Gain
+/-18.1dB. This sets the amount of gain for the pre-effect high shelving EQ.
Early Reflections
Type
Sharp, Loose, Modulated, Reverse. This determines the shape of the reflections.
See the graphic Early Reflections Types, Pre-Delay, and ER Time below for more
details.
ER Time
8.9-600.0ms. This sets the duration of the early reflections, after the pre-delay time.
Pre Delay
0.0-200.0ms. The pre-delay is the time between the initial signal and the early
reflections.
OASYS PCI

Early Reflections Long

375