Wide Stereo - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Filters

Wide Stereo

This effect enhances the perception of stereo imaging in the input signal.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Stereo Enhancer
Width
0-100. This sets the degree to which the Enhancer effect is applied.
Width Mod
List of Modulation Sources. This sets the modulation source for controlling the
width. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the width.
Left Delay Time
0.0-50.0ms. These parameters set the delay time for the left and right channels.
Specifying a slightly different delay time for the left and right channel will add a
stereo image, depth, and width to the sound.
Right Delay Time
0.0-50.0ms. This sets the delay time for the right channel.
Wide Stereo
Wide Stereo
Off, On. This adds additional stereo width to the signal.
Position
0-100. This adjusts the apparent listening position.
Output
Wet/Dry
Dry, 1:99-99:1, Wet. This sets the balance between the effect and the dry signal.
OASYS PCI
Wide Stereo
449