6-Tap Chorus - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

6-Tap Chorus

6-Tap Chorus
This effect has six chorus blocks with different LFO phases. You can produce a
complex stereo image by setting a different delay time and depth for each block.
Input
Source
Left, L + R. This is a mono-in, stereo-out effect. Stereo signals are preserved in the
dry mix at the output, but the chorus effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Tap 1
Delay
0.0-670.0ms. This sets the delay time for Tap 1, in milliseconds.
Depth
0-100. This controls the depth of LFO pitch modulation for Tap 1.
Level
0-100. This sets the output volume level for Tap 1.
Level Mod
List of Modulation Sources. This sets the modulation source for controlling the
output levels for all of the taps, 1 through 6. For a complete list of mod sources,
please see "Modulation Sources" on page 2.
Mod Amt
+/-100. This sets the amount by which the mod source affects the output level of tap
1.
248
Chorus
OASYS PCI