Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 351

Delay
Output
Direct Diffusion
0-100. This allows you to add in the sound of the diffusers alone, before the delays.
Rolloff
0-24000Hz. This controls an overall lowpass filter on the output of the delays.
Settings around 6-8kHz are good for producing a warm, smooth sound.
Wet/Dry
Dry, 1:99-99:1, Wet. This sets the balance between the effect and the dry signal.
Wet/Dry Mod
List of Modulation Sources. This sets the modulation source for controlling the
wet/dry mix. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the wet/dry mix.
OASYS PCI
St Diffuse Dly
343