Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 578

St RandomPhaser
L/R Phase
+/-180. This sets the phase difference between the LFOs for the right and left
channels. Off-setting the phase between the two, as shown below, enhances the
stereo effect.
LFO Phase
Frequency
0.00-20.00Hz. This sets the frequency for the main LFO.
Step Freq
0.00-50.00Hz. This sets the frequency of the LFO steps. If the Random waveform is
being used, then this will determine the frequency of the sample-and-hold effect.
Frequency Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO frequencies. The same modulator can be used for both the main LFO and the
step LFO. For a complete list, please see "Modulation Sources" on page 2.
Freq Mod Amount
+/-20.00Hz. This sets the amount by which the mod source affects the frequency of
the main LFO .
Step Mod Amount
+/-50.00Hz. This sets the amount by which the mod source affects the frequency of
the step LFO.
570
0° +90° +180°
–180° 0°
–90°
Phasers
OASYS PCI