Eq Chorus - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Chorus

EQ Chorus

This is a mono-in, mono-out chorus, combined with a two-band shelving EQ.
Input
Source
Left, L + R. This is a mono-in, mono-out effect. Stereo signals are preserved in the
dry mix at the output, but the chorus effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Pre EQ
Low Freq
20-2000Hz. The frequency of the low shelving EQ.
Low Gain
+/-18.1dB. The gain of the low shelving EQ.
High Freq
5000-20,000Hz. The frequency of the high shelving EQ.
High Gain
+/-18.1dB. The gain of the high shelving EQ.
Chorus
Delay
0.0-50.0ms. This sets the delay time for the chorus, in milliseconds.
Depth
0-100. This controls the depth of LFO pitch modulation.
Depth Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO depth. For a complete list, please see "Modulation Sources" on page 2.
OASYS PCI
EQ Chorus
253