Filters
Stereo Enhancer
This stereo-input, stereo-output effect enhances the stereo image, and adds
presence to the sound. It's useful when you wish to emphasize a stereo effect, or to
create a stereo image from a monaural source.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Pre-EQ
Low Freq
20-2000Hz. This sets the frequency of the pre-effect low shelving EQ.
Low Gain
+/-18.1dB. This sets the amount of boost or cut for the pre-effect low shelving EQ.
High Freq
20-2000Hz. This sets the frequency of the pre-effect high shelving EQ.
High Gain
+/-18.1dB. This sets the amount of boost or cut for the pre-effect high shelving EQ.
Stereo Dyna Exciter
Emphasis Point
0-100. This sets the frequency to be emphasized. Higher values will emphasize
lower frequencies.
Emphasis Mod
List of Modulation Sources. This selects the modulation source for controlling the
emphasis point. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the emphasis point.
Blend
+/-100. This parameter controls the intensity of the exciter effect. Positive values
emphasize different frequency patterns than negative values.
OASYS PCI
Stereo Enhancer
443