Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 34

Analog Bass-Lead
Decay
0-100. This sets the decay time of the ADSR envelope, which controls how long it
takes the envelope to fall to the sustain level after the attack is complete.
Sustain
0-100. This sets the sustain level for the ADSR envelope. After the decay time is
complete, the envelope will stay at this level as long as the note is held.
Release
0-100. This sets the release time of the ADSR envelope, which controls how long it
takes the envelope to fall to zero after the note is released.
ADSR Envelope
LFO
Frequency
0.0-20.0 Hz. This controls the speed of the LFO.
Waveform
Sine, Triangle, Saw, Square. This sets the shape of the LFO.
LFO Mod
Oscillator Freq
On, Off. When this is enabled, the LFO will modulate the pitch of the oscillator.
Pulse Width
On, Off. When this is enabled, the LFO will modulate the oscillator's pulse width.
Note that if the oscillator's Pulse Amt parameter is set very low, this effect may not
be audible.
26
Attack time Decay time
Sustain
Level
Sustain while Release time
holding note
Analog Synths
OASYS PCI