St Diffuse Dly - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

St Diffuse Dly

St Diffuse Dly
This is a true stereo delay with dual input diffusers for each channel. The diffusers
are based on part of the O-Verb reverb, and serve to soften and blur the delayed
sound. The delays also feature smooth, clickless MIDI clock synchronization, and
individual level, pan, feedback amount, and high and low filters for each channel.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Diffusion 1
0.00-100.00. This sets the amount of diffusion in the first diffuser. Setting both
diffusers to around 50 produces optimal amounts of diffusion; extremely high
levels may cause ringing.
Diffusion 2
0.00-100.00. This sets the amount of diffusion in the second diffuser.
Delay Control
Delay Mode
Delay Time, Manual Tempo, MIDI Tempo. This determines how the delay times
will be controlled.
Delay Time. The delay times will be controlled by the tap's Delay Time knobs.
Manual Tempo. The delay times will be controlled by the combination of the
Manual Tempo knob and each tap's Note Value menu.
MIDI Tempo. The delay times will be controlled by the combination of received
MIDI clocks and each tap's Note Value menu.
Manual Tempo
40-240bpm. This sets the tempo for the delays, when the Delay Mode is set to
Manual Tempo.
Smoothing
0.0-100.0. This determines how long it takes for the delay times to respond to tempo
changes and MIDI controller modulation. 50.0 works well in most cases. Lower
settings will mean that the delay times will change very quickly, but may also cause
clicking. Higher settings will make the delays slide very slowly to their new values,
which can create interesting special effects.
340
Delay
OASYS PCI