Cobalt 4 - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

PCM

Cobalt 4+

Cobalt 4+ is a PCM synth plug-in with a two-level velocity-switched multisample,
a 4 pole (24dB per octave) resonant lowpass filter, and two DSP-rate ADSR
envelopes for filter and amplitude modulation.
Oscillator
Samples
This Patch lets you use velocity to switch between the two Multisamples. Velocities
lower than the Vel Switch setting select the Lo Multisample, and velocities equal to
or higher than the Vel Switch setting select the Hi Multisample.
Lo Multisample
This is the low-velocity Multisample. When a note's MIDI velocity is lower than the
Vel Switch setting. you'll hear this Multisample.
To select a Multisample:
1.
(MacOS Only: Alternatively, you can select the Multisample slot and then double-
click the name of the Multisample in the Catalog.)
Double-clicking on the Multisample name brings up the Multisample Edit window.
You can delete a Multisample from a Patch by using the Delete key, or the Edit
menu's cut command.
Hi Multisample
This is the high-velocity Multisample. When a note's MIDI velocity is equal to or
higher than the Vel Switch setting. you'll hear this Multisample.
Lo Level
0-100. This controls the volume level of the low (Lo) Multisample.
Hi Level
0-100. This controls the volume level of the high (Hi) Multisample.
Vel Switch
0-127. You can use velocity to switch between the two Multisamples. Velocities
lower than the Vel Switch setting will play the Lo Multisample, and velocities equal
to or higher than the Vel Switch setting will play the Hi Multisample.
OASYS PCI
Drag a Multisample from the Catalog onto the desired Multisample slot.
Cobalt 4+
121