St Highcut Filter - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

EQ

St HighCut Filter

This is a stereo-in, stereo-out high cut filter, with a choice of 12dB or 24dB per
octave slope. As with all EQs in the OASYS PCI, the curves are smooth and
symmetrical in frequency, modeling analog EQs.
For the more technically inclined, the EQ calculations are all double-precision,
using first-order error-feedback.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Note that extreme positive or negative gain settings can dramatically increase the
volume within the EQ effect, so it may be necessary to decrease the input volume to
avoid clipping.
High Cut Filter
Frequency
24-24000Hz. This sets the cutoff frequency for the high cut filter.
Slope
12dB/Octave, 24dB/Octave. This selects the severity of the high cut filter.
OASYS PCI
St HighCut Filter
405