Pitch Shift Mod - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Pitch Shifters

Pitch Shift Mod

This effect modulates a subtle detune effect with an LFO.
Input
Source
Left, L + R. This is a mono-in, stereo-out effect. Stereo signals are preserved in the
dry mix at the output, but the effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Pitch Shift Mod
Pitch Shift
+/-100.0. .This controls the amount of pitch shift, in cents (1/100 of a semitone).
Depth
+/-100.0. This sets the depth of LFO pitch modulation, in cents (1/100 of a
semitone).
Depth Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO depth. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100.0. This sets the amount by which the mod source affects the pitch shift, in
cents (1/100 of a semitone).
Spread
0-100. This controls the width of the effect's stereo image, without affecting the dry
signal. A value of +100 gives the widest stereo image, and a value of 0 collapses the
output to mono. Negative values will reverse the left and right channels of the
effect output.
OASYS PCI
Pitch Shift Mod
599