Looper X - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Looper X

Looper X
Looper X is a PCM synth plug-in optimized for playback of drum loops and simple
drum sounds, similar to Looper. In addition to a single multisample oscillator and a
DSP-rate attack-release envelope, Looper X adds Multisample-controlled output
pan.
Oscillator
Multisample
This is the Multisample assigned to the oscillator.
To select a Multisample:
1.
(MacOS Only: Alternatively, you can select the Multisample slot and then double-
click the name of the Multisample in the Catalog.)
Double-clicking on the Multisample name brings up the Multisample Edit window.
You can delete a Multisample from a Patch by using the Delete key, or the Edit
menu's cut command.
Pitch
Tune
+/- 48. This sets the coarse tuning of the oscillator over an eight-octave range, in
half-steps.
Fine
+/- 100. This sets the fine tuning of the oscillator, in cents (1/100 of a semitone).
Amplifier
Envelope
These parameters control an attack-release envelope dedicated to the output
volume.
Attack
0-100. This sets the attack time of the envelope–the time that it takes from the
moment that the key is pressed until the envelope reaches its peak.
Release
0-100. This sets the release time of the envelope, which controls how long it takes
the envelope to fall to zero after the note is released.
142
Drag a Multisample from the Catalog onto the desired Multisample slot.
PCM
OASYS PCI