Detune - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Pitch Shifters

Detune

This is a subtle pitch shift effect, to be used for thickening, like a chorus.
Input
Source
Left, L + R. This is a mono-in, mono-out effect. Stereo signals are preserved in the
dry mix at the output, but the effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Delay
Delay Time
0.0-280.0ms. This sets the amount of delay for the detune effect.
High Damp
0-100. This controls the amount of high frequency damping.
Detune
Pitch Shift
+/-100.0. .This controls the amount of pitch shift, in cents (1/100 of a semitone).
Pitch Shift Mod
List of Modulation Sources. This sets the modulation source for controlling the
amount of pitch shift. For a complete list, please see "Modulation Sources" on
page 2.
Mod Amount
+/-100.0. This sets the amount by which the mod source affects the pitch shift, in
cents (1/100 of a semitone).
Output
Mode
Mono, Stereo. This controls whether the effect output is mono or simulated stereo.
OASYS PCI
Detune
597