St Tempoflanger - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

St TempoFlanger

St TempoFlanger
This is a stereo-in, stereo-out flanger with a complex, MIDI-syncable tempo LFO.
Try modulating the LFO parameters, such as shape, smoothing, and L/R phase, in
real time.
For detailed instructions on working with MIDI-synced LFOs, see "MIDI Tempo
LFOs" on page 5.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Stereo Flanger
Delay
0.0-50.0ms. This sets the center delay for the flanger.
Depth
0-100. This controls the depth of LFO modulation.
Feedback Mode
Normal, Cross. This selects the feedback routing for the flanger.
Normal. The channels will feed back into themselves, left into left and right into
right.
Cross. The channels will feed back into each other, left into right and right into left.
Feedback
+/-100. This controls the amount of feedback in the flanger. Higher feedback
settings result in a more extreme sound.
Hi Damping
0-100. This adjusts the amount of high frequency damping in the feedback loop.
Spread
+/-100. This controls the width of the effect's stereo image, without affecting the dry
signal. A value of +100 gives the widest stereo image, and a value of 0 collapses the
output to mono. Negative values will reverse the left and right channels of the
effect output.
464
Flangers
OASYS PCI