Tremolo Phaser - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Phasers

Tremolo Phaser

This stereo-in, stereo-out effect follows a stereo phaser with a stereo tremolo. The
phaser and tremolo LFOs are synchronized, with adjustable phase offsets. This
effect works particularly well with electric piano sounds.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
LFO
Frequency
0.00-20.00Hz. This controls the speed of the LFO.
Frequency Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO frequency. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the LFO frequency.
Stereo Phaser
L/R Phase
+/-180. This sets the phase difference between the LFOs for the right and left
channels, for the phaser only. Off-setting the phase between the two, as shown
below, enhances the stereo effect.
OASYS PCI
Tremolo Phaser
589