Delay Mod Long - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Delay

Delay Mod Long

This is an 8-second version of Delay Mod (described on page 315), featuring
smoothly modulatable delay time and high and low filters.
Input
Source
Left, L + R. This is a mono-in, mono-out effect. Stereo signals are preserved in the
dry mix at the output, but the effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Level Mod
List of Modulation Sources. This sets the modulation source for controlling the
input level, for "splashed" delays. For a complete list, please see "Modulation
Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the input level.
Delay
Delay Time
0.0-8000.0ms. This sets the delay time for the tap, in milliseconds.
Delay Mod
List of Modulation Sources. This sets the modulation source for controlling the
delay time. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the delay time.
Feedback
Feedback
+/-100. This adjusts the amount of feedback from the tap back into the delay line.
Negative values invert the phase of the feedback.
OASYS PCI
Delay Mod Long
313