Dual Resonator - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Dual Resonator

Dual Resonator
This effect includes two independent resonators, which each cause the input signal
to resonate at a specified pitch. For example, the resonators can add a unique
character to a string sound by emphasizing certain harmonics, or add a pitched
element to a drum loop.
Input
Source
Left, L + R. This is a mono-in, stereo-out effect. Stereo signals are preserved in the
dry mix at the output, but the effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
ResonatorVoice1-2
Pitch (1-2)
F#-1,99-G8,0. This sets the pitch of the resonator.
Resonance (1-2)
+/-100. This controls the intensity of the resonance, when Control Mode is set to
Manual. If the Resonance parameter has a negative value, harmonics will be
changed, and resonance will occur at a pitch one octave below.
High Cut (1-2)
0-100. This adjusts the amount of high frequency cut for the resonator.
Level (1-2)
0-100. This sets the output level of the resonator.
Pan (1-2)
0-100. This sets the stereo pan position of the resonator.
Resonance Mod / LFO
Control Mode
Manual, LFO, Mod Source. This determines how the resonator will be controlled.
484
Modulations
OASYS PCI