Slap Bass - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Guitar

Slap Bass

This Patch models a slapped electric bass. It includes string gauge, bridge rigidity,
control over pick type and technique, pickup position and tone, and more.
String Damping
Damping
0-100. This controls the decay time for the string's high frequencies. Lower settings
mean a shorter high frequency decay time. Damping interacts with the Decay
parameter, below, which controls the overall decay time.
Center
C-1 to G#9. This sets the center note for the damping key tracking, as set by the Key
Track parameter, below.
Key Track
+/-100. This adjusts damping as you play higher and lower on the keyboard. At the
center key (as set above), the damping will be exactly the value set by the Damping
knob. With positive tracking, the damping will increase as you play above the
center key, and decrease as you play below it. With negative tracking, damping will
decrease as you play above the center key, and increase as you play below it.
Damping Mod
List of Modulation Sources. This sets the modulation source for controlling the
damping. For a complete list, please see "Modulation Sources" on page 2.
Amount
0-100. This sets the amount by which the mod source affects the damping.
Maximum
0-100. This sets the maximum amount of damping, even with modulation.
String Decay
Decay
0-100. This controls the overall decay time of the string.
Center
C-1 to G#9. This sets the center note for the damping key tracking, as set by the Key
Track parameter, below.
OASYS PCI
Slap Bass
79