Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 48

Mini Synth
Waveform
Triangle, Reverse Saw, Sawtooth, Square, Pulse 30%, Pulse 10%. This selects the
shape of the oscillator.
Control
On, Off. This enables and disables keyboard control of the oscillator.
On. Oscillator 3's pitch will track the keyboard. Generally, you should select this
option when using oscillator 3 as an audio oscillator.
Off. Oscillator 3's pitch will be set by the Frequency knob, and will not track the
keyboard. Generally, you should select this option when using oscillator 3 as an
LFO.
Mixer
Osc 1
0-100. This controls the output level of oscillator 1. The button to the right of the
knob turns the output on and off completely.
Osc 2
0-100. This controls the output level of oscillator 2. The button to the right of the
knob turns the output on and off completely.
Osc 3
0-100. This controls the output level of oscillator 2. The button to the right of the
knob turns the output on and off completely.
Filter Control
Filter Modulation
On, Off. This enables and disables filter modulation by the Mod Controller and
Mod Mix, as set in the Controllers section.
Kbd. Control 1
On, Off. This adds 1/3 of full keyboard tracking to the filter.
The tracking for both Kbd. Controls 1 and 2 is centered at note E2, which is the
lowest note on the original synth. The filter cutoff frequency for notes above E2 will
be increased above the Cutoff knob setting, and the cutoff frequency for notes
below E2 will be decreased.
Kbd. Control 2
On, Off. This adds 2/3 of full keyboard tracking to the filter. By enabling both Kbd.
Controls 1 and 2, you can apply full keyboard tracking.
40
Analog Synths
OASYS PCI