Dual Delay - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Delay

Dual Delay

This is a true stereo delay with high and low filters, and separate controls for the
left and right channels.
Input
Level (Left and Right)
-INF, -69.0 to 0.0dB. This sets the input level for the left and right delays. It does not
affect the dry signal.
Level Mod
List of Modulation Sources. This sets the modulation source for controlling the
input level, for "splashed" delays. For a complete list, please see "Modulation
Sources" on page 2.
Mod Amt (Left and Right)
+/-100. This sets the amount by which the mod source affects the left and right
delay input levels.
Delays
Delay Time (Left and Right)
0.0-680.0ms. This sets the delay times for left and right, in milliseconds.
High Damping (Left and Right)
0-100. This filter cuts the left and right delay's high frequencies. Use this to make
the delay sound warmer, like a tape delay.
Low Damping (Left and Right)
0-100. This filter cuts the left and right delay's low frequencies. Use this to make the
delay sound thinner.
Feedback
Level (Left and Right)
+/-100. This adjusts the amount of feedback for the left and right delays. Negative
values invert the phase of the feedback.
Feedback Mod
List of Modulation Sources. This sets the modulation source for controlling the
delay feedback levels, affecting all three taps equally. For a complete list, please see
"Modulation Sources" on page 2.
OASYS PCI
Dual Delay
323