Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 307

Compressor & Gate
Gate Ratio and Threshold
Threshold
-80.0 to 0.0dB. This determines the input level at which the gate will open. Input
levels below the threshold will be reduced in gain, and input levels above the
threshold will be passed through unchanged.
Attack
0-50ms. This determines how quickly the gate will open after the signal rises above
the threshold.
Release
20-3000ms. This controls how quickly the gate will close after the signal falls below
the threshold.
Hold
0-100. This allows you to set a sustain time between the attack and release of the
gate, so that if the signal rises above the threshold even momentarily, the gate will
remain open for the specified hold time.
Gain Reduction meter
This meter shows the amount of gain reduction caused by the gate.
Output meter
This meter shows the output level of the gate.
OASYS PCI
Output Level
Ratio = 1:1
Threshold
Ratio = 1:20
Input Level
St Expander Gate
299