Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 343

Delay
High Cut
0-100. This filter cuts the delay's high frequencies. Use this to make the delay sound
warmer, like a tape delay.
Feedback
Feedback
+/-100. This adjusts the amount of feedback into the delay line. Negative values
invert the phase of the feedback.
Feedback Mod
List of Modulation Sources. This sets the modulation source for controlling the
delay feedback level. For a complete list, please see "Modulation Sources" on
page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the feedback level.
Output
Mode
Mono, Stereo. This controls whether the effect output is mono or simulated stereo.
When this is set to Mono, the output is in mono.
When this is set to Stereo, the output is simulated stereo, with the right effect
output inverted. Note that this simulated stereo effect is not mono-compatible.
Wet/Dry
Dry, 1:99-99:1, Wet. This sets the balance between the effect and the dry signal.
Wet/Dry Mod
List of Modulation Sources. This sets the modulation source for controlling the
wet/dry mix. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the wet/dry mix.
OASYS PCI
Multitap Delay
335