Ensemble - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Ensemble

Ensemble
This is a mono-in, stereo-out ensemble, which combines three choruses panned left,
right, and center with a complex-waveform "shimmering" LFO. Ensemble is most
effective on string sounds.
Input
Source
Left, L + R. This is a mono-in, stereo-out effect. Stereo signals are preserved in the
dry mix at the output, but the effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Pre EQ
Low Gain
+/-18.1dB. This sets the gain of the pre-effect low shelving EQ.
High Gain
+/-18.1dB. This sets the gain of the pre-effect high shelving EQ.
Ensemble
Rate
0-100. This controls the frequency of the chorus LFOs.
Mod Source
List of Modulation Sources. This sets the modulation source for controlling the
LFO rate. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the LFO rate.
Shimmer
0-100. The LFOs are modulated by a separate, much faster LFO, which adds
shimmering to the waveform. This parameter controls the amount of "shimmer"
370
Ensemble
OASYS PCI