Flute - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Waveguide

Flute

This Patch is a physical model of a flute, including breath pressure, the tonal
quality of the breath noise, the interaction between the breath and the bore, the
tonal quality of the bore, playing style, and more.
Breath Pressure
Pressure
0.0-100.0. This controls the overall force of the breath pressure, modeling how hard
you are blowing into the flute.
Env Amount
0.0-100.0 This sets the amount by which the envelope affects the breath input.
Attack
0-100. This sets the attack time of the envelope, which controls how long it takes
from the moment that the key is pressed until the envelope reaches its peak.
Decay
0-100. This sets the decay time of the envelope, which controls how long it takes the
envelope to fall to the sustain level after the attack is complete.
Sustain
0-100. This sets the sustain level for the envelope. After the decay time is complete,
the envelope will stay at this level as long as the note is held.
Release
0-100. This sets the release time of the envelope, which controls how long it takes
the envelope to fall to zero after the note is released.
Breath Noise
Gain
0.0-100.0. This is the maximum breath level, scaled by the Breath Pressure section's
Input and Input Mod parameters.
Frequency
0-8000Hz. The tone of the breath noise is shaped by a bandpass filter, and this
controls the center frequency of that filter.
Width
0.0-100.0. This controls the bandwidth of the filter. At 0, the filter will be very
resonant.
OASYS PCI
Flute
219