Dual Midi Gate - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Compressor & Gate

Dual MIDI Gate

This is a stereo-in, stereo-out MIDI-controlled gate. Unlike the Expander Gate,
which is controlled by the input level, the Dual MIDI Gate opens and closes via
MIDI triggers. The left and right channels may be controlled completely separately,
with independent MIDI triggers and envelope settings.
You can use this for manually gating a recorded signal, for precise control over the
gating process, or for special effects, such as rhythmic gating. You can also think of
this as two "amp envelope" sections from an analog synthesizer.
MIDI Gate (Left and Right Channels)
Volume
0-100. This sets the default volume level for signals passing through the channel's
gate. For complete gating, set this to 0. Use low and middle values to create subtle
pulsing effects, in which the signal is always present, but triggering the gate makes
it louder.
Env Amount
0-100. This controls the amount of affect the envelope will have on the channel's
output level, adding to the setting on the Volume knob. At 0, the envelope will have
no affect. At +100, the envelope will set the output to max at its peak, even if
Volume is set to 0.
Envelope amount affect on output volume
Envelope (Left and Right Channels)
Attack
0-100. This sets the attack time of the channel's amplitude envelope, which controls
how long it takes from the moment that the key is pressed until the envelope
reaches its peak.
OASYS PCI
+100
0
Dual MIDI Gate
287