Pro Synth - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Pro Synth

Pro Synth
The Pro Synth is a precise model of a classic analog synth, including a special 24dB
per octave lowpass filter, two oscillators with multiple simultaneous waveform
outputs and sync, noise generator, poly mod, specifically shaped filter and
amplitude ADS envelopes, and VCA output nonlinearity.
For completely authentic playing, set the Program Edit page Voice Allocation
parameter to Poly Reuse.
Poly Mod
The Poly Mod section allows you to route the filter envelope or oscillator B to
modulate the frequency of oscillator A, the pulse width of oscillator A, or the filter
itself.
Filt Env
0-100. This sets the amount of the filter envelope to be used as a Poly Mod source.
Osc B
0-100. This sets the amount of oscillator B to be used as a Poly Mod source.
Freq A
On, Off. When this is turned on, the frequency of oscillator A will be modulated by
the combination of the filter envelope and oscillator B, as set above. Among other
things, you can use this to create frequency sweeps with the envelope, frequency
modulation (as in "FM") via oscillator B, or sync sweeps via the envelope, in
conjunction with the Sync button.
PW A
On, Off. When this is turned on, the pulse width of oscillator A will be modulated
by the combination of the filter envelope and oscillator B, as set above.
Filter
On, Off. When this is turned on, the filter will be modulated by the combination of
the filter envelope and oscillator B, as set above. Modulating the filter with
oscillator B can produce some interesting sounds.
LFO
Frequency
0.00-20.00 Hz. This controls the speed of the LFO.
Waveform
Saw, Triangle, Square. This sets the shape of the LFO.
50
Analog Synths
OASYS PCI