St Env Phaser - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

St Env Phaser

St Env Phaser
This is a stereo-in, stereo-out phaser based on an envelope instead of an LFO. You
can trigger the envelope via MIDI, and also simply control the phaser frequency
directly from a MIDI controller.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Stereo Envelope Phaser
L Bottom
0-100. This sets the left phaser frequency when the envelope or mod source is at
minimum.
L Top
0-100. This sets the left phaser frequency when the envelope or mod source is at
maximum.
R Bottom
0-100. This sets the right phaser frequency when the envelope or mod source is at
minimum.
R Top
0-100. This sets the right phaser frequency when the envelope or mod source is at
maximum.
Sweep Mode
EG, Mod Source. This determines how the phaser will be controlled.
EG. The phaser will be controlled by the envelope generator (EG).
Mod Source. The phaser will be controlled directly by the MIDI mod source.
EG Trigger/Mod
List of Modulation Sources. When Sweep Mode is set to EG, this selects the
modulation source that triggers the envelope. When Sweep Mode is set to Mod
Source, this selects the modulation source that controls the phaser. For a complete
list of modulation sources, please see "Modulation Sources" on page 2.
564
Phasers
OASYS PCI