St Auto Pan - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

St Auto Pan

St Auto Pan
This is a stereo-in, stereo-out auto-panner.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
LFO
Waveform
Triangle, Sine. This selects the LFO shape.
Shape
+/-100. This adjusts the shape of the LFO waveform, from logarithmic to linear to
exponential. Positive values shape the waveform so that it spends more time in the
"up" part of the cycle, and negative values make it spend more time in the "down"
part of the cycle, as shown below.
LFO Shape
Phase
+/-180. This sets the phase difference between the LFOs for the right and left
channels. When you change the value gradually from 0, the sounds from the left
and right channels will chase each other around. If you set the parameter to +180 or
–180, the sounds from each channel will cross over each other.
You need to input different sounds to each channel in order for this parameter to be
effective.
526
LFO Shape = 0 to +100 LFO Shape = 0 to -100
Sine Waveform
Pan & Tremolo
OASYS PCI