Tempo Chorus - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Chorus

Tempo Chorus

This is a chorus with a complex, tempo-controlled LFO. For more information on
syncing LFOs to MIDI, see "MIDI Tempo LFOs" on page 5.
Input
Source
Left, L + R. This is a mono-in, mono-out effect. Stereo signals are preserved in the
dry mix at the output, but the chorus effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Chorus
Delay
0.0-50.0ms. This sets the delay time for the chorus, in milliseconds.
Depth
0-100. This controls the depth of LFO pitch modulation.
Depth Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO depth. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the LFO depth.
LFO
General
Waveform
Triangle, Sine. This selects the shape of the LFO.
LFO Control
Frequency Knob, Manual Tempo, MIDI Tempo. The LFO speed can be controlled
either by the Frequency knob (including the mod source), the Manual Tempo knob,
or by MIDI Tempo (derived from MIDI clocks).
OASYS PCI
Tempo Chorus
281