Analog 2 Osc - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Analog 2 Osc

Analog 2 Osc
Analog 2 Osc is a two-oscillator analog synth model, including a 24dB per octave
multi-mode, multi-pole filter, pulse width modulation, colored noise generator,
ring modulator, filter and amplitude ADSR envelopes, and a routable LFO.
Oscillator 1
Frequency
+/- 24. This sets the coarse tuning of the oscillator over a four-octave range, in half-
steps.
Waveform
Sawtooth, Pulse, Triangle. This selects the shape of oscillator 1. If Pulse is selected,
the Pulse Width control, below, sets the width of the pulse.
Pulse Width
0.0-100.0. This sets the width of the pulse waveform, as a percentage of the full
waveform cycle. 50.0 produces a square wave, smaller amounts produce a
waveform with a shorter "up" time, and greater amounts produce a waveform
with a longer "up" time, as shown below. Pulse width can also be modulated via
the LFO.
Pulse Width
Oscillator 2
Frequency
+/- 24. This sets the coarse tuning of the oscillator over a four-octave range, in half-
steps.
14
0% 25% 50%
Analog Synths
75% 100%
OASYS PCI